|
 P4ITA
mainboard is an ATX mainboard that uses a 6-layer printed circuit board and
measures 244 mm x 305. The mainboard features a Socket 423 that accommodates
Intel® Pentium® 4 processors supporting frontside bus (FSB) speeds up to 400 MHz
and data bus bandwidths up to 3.2 GB/s. The P4ITA incorporates the Intel® Tehama
850 Northbridge and Intel® 82801BA (ICH2) Southbridge chipsets, combining
sup-port for two-channel Rambus DRAM (RDRAM), 2X/4X AGP (1.5V only), and the AC
97 codec. The Intel 82801I/O controller hub includes an integrated au-dio-codec
controller that lets the processor efficiently decode sound generated by the
integrated audio system.
PROCESSORS
- Intel® Pentium®
4 processor (423 pins)
CHIPSET
- Intel® 82845 &
82801BA -- Memory Controller Hub (MCH), I/O Controller Hub 2 (ICH2) & Firmware
Hub (FWH) with following features:
- Supports
Direct RDRAM
- Supports 4X
AGP (AGP 2.0 Specification), 1.5V only
- LPC I/O:
Winbond 83627HF-AW
- AC97 audio
codec: Compliant with AC97 2.2 specification
- IEEE 1394
controller (optional)
- LAN: Built-in
Ethernet 10/100 MAC on ICH2 and Intel® 82562EM PHY on board (optional)
- Creative PCI
Audio Controller (optional)
 SYSTEM
BIOS
- Award BIOS with
Flash ROM in Firmware Hub (FWH)
- Supports Plug
and Play 1.0A, AMP 1.2, Multi Boot, DMI
- Full support
for ACPI revision 1.0A specification
MEMORY
- Four 184-pin
RIMM sockets to support PC600 & PC800 Direct Rambus Channel
- Maximum: 2GB
I/O INTERFACE
- Supports Plug
and Play function
- PS/2 keyboard
and PS/2 mouse connectors
- Dual USB Ports
and LAN Connector (LAN optional)
- 1 - EPP/ECP
mode parallel port
- 2 - 16550
high-speed serial I/O port
- Audio ports
(Line-in, Line-out, Mic-in, CD-in and game port)
- Dual PCI IDE
interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra
DMA66/100)
- Supports
360K~2.88M Byte, 3 mode FDDs or LS120
- ATX power
supply connectors
- Ports, headers
and others:
- IrDA header
- Extra USB
header
- Chassis open
detector header
- Green, HDD,
power indicator LED headers
- HDD LED, ACPI
MSG LED, Reset Switch, Power Switch headers
- CPU and
chasis fan headers
- LAN Card Wake
Up / Internal Modem Ring Wake Up headers
RTC & BATTERY
- Intel® I/O
Controller Hub 2 (ICH2) included 256 bytes of CMOS SRAM
- With CMOS SRAM
hardware clear jumper
EXPANSION SLOTS
- 5 PCI slots, 1
4X AGP slot (AGP Pro optional), 1 CNR slot
FORM FACTOR
- ATX
(305mm*244mm), 6 Layers
|
